written by Matias Collins on June 17 of 2019 and read by 177
print
Dear sailor competing at the Europeans next June 26 to 29.
Today the event released the inspection/measurement forms to be downloaded from the website, and for faster procedure, to be completed before arrival at the venue, no matter if ByPassing the inspection/measurement procedure or proceeding to inspect/measure your boat.
It is important you check your measurement certificate/form to complete properly the event forms.
Note if you have changed anything on your boat that obtained the ByPass at past measurements, you lose the ByPass possibility, proceed to inspect/measure the one at the event.
The Time schedule to proceed for inspection/measurement is issued in a first come, first serve basis, please you may start doing it through an email to and copy to ;admin@soling.com ; you also may request this upon arrival.
As an update June 24 still have two spots, and 25 despite first morning schedule, remains free.
Those applying to use ByPass, no need to request the time to be checked, just advise event measurer and he will do this when free with boat either at the trailer or already setup in the water. BUT make sure the forms are signed by the event measurer before race starts on the 26.
Donwload here the event measurement papers:
www.soling.com/downloads/eventmeasurementforms.pdf
The Europeans also will be releasing today an Amendment nr2. The one corrects a mistake in the class rules regarding spreaders. Carbon is allowed. The Amendment is mainly to make sure there are not problems with the ones meanwhile World Sailing is updating class rules. Please check later the amendments section of the event website.
Amendments for 2019 Europeans
print